Things to check before an installation: Has the hardware arrived? Is the correct hardware in the box? Check the delivery note and serial numbers. Make a note of the serial number for each unit – do not mix these up! If there are multiple Outdoor Units (ODUs), make sure you’ve identified cabling for multiple ODUs …
Pre-Requisites for the Installer for a SimRush installation Read More »
Factors to consider when choosing ODU location: Customer’s indoor router placement 40m max cable run to Indoor Unit or PoE injector Get as much height as you can Avoid obstacles, get best line of sight Obstacles: buildings, walls, rooflines, metal, double glazing Is there two chimneys? Pick the one closest to the signal Think about: …
Download our installation guide here: Please note installs should only be carried out by those who are competent at working at height.
SimRush has an Outdoor Unit that is mounted externally to the premises, usually on the roof. For example, attached to your TV aerial pole or a chimney stack. The higher from the ground the SimRush Outdoor device is the faster your speed will be! There is an ethernet cable run to a second internal device. …
The standard installation may not be suitable for all premises. For example, if your property is over two stories high or is a listed building and you require all cable to be hidden this would not come under a standard installation. In such cases your reseller may conduct a site survey prior to installation to …
What if I have specific requirements that aren’t included in the standard install? Read More »
