Categories

Quick Start Guide – SimRush Power

You are here:
< All Topics

About

The SimRush Power is an indoor controller / router for your network. This model can support up to 3 Outdoor units
(Note that this model does not have built-in WiFi, additional hardware required).
It is pre-configured out of the box and managed through the SimRush web portal SPanel. To get online, simply plug in your SimRush Outdoor unit (ODU) as instructed below.

Instructions

Indoor Unit (Controller)


1 – Connect the ethernet cable to Ethernet Port 5 for ODU1, Ethernet Port 4 for ODU2 and Ethernet Port 3 for ODU3 (far right ports – Highlighted in GREEN)

2 – Connect the Controller to the power adaptor supplied (24v 2.5a DC)

3 – Connect your PC to the LAN (Highlighted in ORANGE)
a. Ethernet port 2 and SFP
b. This model does not have a Wireless card, additional SimRush wireless hardware will automatically connect to the controller and broadcast – Default wireless is “SimRush-xxxxxx” and the Serial number as the password, e.g AABBCC112233 – Serial number is located on the box or back of the controller. It is all the characters before the “/123”

4 – To make changes to the LAN address or Wireless settings, please visit SPanel: https://portal.simrush.com/

5 – (OPTIONAL) Connect your alternative broadband to utilise the built-in Load-Balancing feature, connect Ethernet Port1 ( Highlighted in RED ) to your alternative broadband network. 
Please ensure your alternative broadband router is providing the following network via DHCP:  Gateway: 192.168.1.1 , Subnet: 255.255.255.0

Outdoor Unit (ODU)

Please see the following guides depending on your ODU type:
ODU Guide
ODU Long Range Guide

Previous Quick Start Guide – SimRush One & SimRush One+
Next Quick Start Guide – SimRush Powerline Pro
Table of Contents