Quick Start Guide – SimRush One & SimRush One+

You are here:
< All Topics


The SimRush One & SimRush One+ are indoor wireless controllers / routers for your network.
They are pre-configured out of the box and managed through the SimRush web portal SPanel.  To get online, simply plug in your SimRush Outdoor unit (ODU) as instructed below.


Indoor Unit (Controller)

1 – Connect the ethernet cable to Ethernet Port 5 (Highlighted in GREEN )

2 – Connect the Controller to the power adaptor supplied (24v 1.2a DC)

3 – Connect your PC to the LAN (Highlighted in ORANGE)
a. Ethernet port 2, 3 or 4 ( or SFP fibre port on One+ )
b. Wireless – Default wireless is “SimRush-xxxxxx” and the Serial number as the password, e.g AABBCC112233 – Serial number is located on the box or back of the controller. It is all the characters before the “/123”.

4 – To make changes to the LAN address or Wireless settings, please visit SPanel:

5 – (OPTIONAL) Connect your alternative broadband to utilise the built-in Load-Balancing feature, connect Ethernet Port1 ( Highlighted in RED ) to your alternative broadband network. 
Please ensure your alternative broadband router is providing the following network via DHCP:  Gateway: , Subnet:

Outdoor Unit (ODU)

Please see the following guides depending on your ODU type:
ODU Guide
ODU Long Range Guide

Previous Quick Start Guide – SimRush Omni
Next Quick Start Guide – SimRush Power
Table of Contents