SimRush Core Controller
No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. In an event of disconnect the combo-port provides hardware fail-over feature when the ethernet & fibre are connected to the same device.
100Mbps SFP support – this device that supports 100BASE-LX/100BASE-SX/100BASE-BX fibre modules, as well as standard 1.25G SFP modules.
More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
|CPU core count||9|
|10/100/1000mb Ethernet ports||7|
|Fiber SFP port||1x Combo 1Gb , 1x 10Gb SFP+|
|Dimensions||444 x 175 x 47mm|
|Operating ambient temperature||-20°C .. +60°C|
|Max power consumption||39w|